Plumber in Dubai | Plumbing Services and Repairs from AED 149

Water Leakage Repair

Inspection of visible leaks around taps, basins, toilets, flexible hoses, valves and accessible fittings before any part is replaced.

• Kitchen leakage
• Bathroom leakage
• Leak under the sink

Sink and Drain Unblocking

Clearing light and medium blockages in kitchen sinks, washbasins and floor drains according to pipe type, access and blockage location.

• Slow drainage
• Drain odour
• Water backing up

Tap and Mixer Repair

Repairing dripping taps, poor closing, cartridges and seals, or replacing the fitting after confirming size and connection type.

• Kitchen mixers
• Basin taps
• Shower mixers and sprays

Toilet Cistern Repair

Inspection of continuous running, slow filling, poor flushing, valve failure and leakage around accessible toilet connections.

• Running cistern
• Slow refill
• Base leakage

Leak Under the Kitchen Sink

The trap, flexible hoses, fittings, valve and sink base are inspected after drying the area to identify the real source.

Slow Kitchen Drain

Grease, food residue, trap buildup or poor pipe slope may be involved. The clearing method depends on the pipe and blockage depth.

Bad Smell from a Floor Drain

Possible causes include a dry water trap, buildup, an unsealed cover, venting issues or a deeper drainage problem.

Low Water Pressure

Aerators, shower heads, mixers, valves and visible pipework are checked before assuming a wider supply problem.

Toilet Leakage

The cistern, connector, fill valve, base seal and visible joints are checked before dismantling.

Unstable Hot or Cold Water

The cause may be the mixer, blending valve, water heater or pressure difference and may require coordinated inspection.

Problem Source Inspection

Dry the area, run the water and observe the leakage point, drainage behaviour or recurring sound before dismantling.

• Locate the source
• Visual inspection
• Operational test

Fittings and Valve Check

Inspect accessible hoses, fittings, valves, traps and nuts to determine whether tightening, resealing or replacement is required.

• Flexible hoses
• Angle valves
• Fittings and joints

Repair or Part Replacement

After diagnosis, the part and labour price are explained before replacement and the correct size is confirmed.

• Price before replacement
• Correct fitting size
• Test after installation

Suitable Mechanical Drain Clearing

Select a method according to drain type and blockage position instead of using aggressive chemicals that may damage old pipework.

• Kitchen sink clearing
• Washbasin clearing
• Floor drain clearing

Testing After Repair

Open the water, inspect the repaired connection and confirm that visible leakage or slow drainage has improved.

• Pressure test
• Drainage test
• Leak review

Recommendation for Wider Work

If the leak is concealed or linked to a shared line, the customer is told what further detection is required before breaking surfaces.

• No random breaking
• Define the investigation scope
• Customer approval first

Kitchen and Bathroom in One Visit

Suitable for a dripping mixer, leaking hose, toilet cistern and slow drain at the same property.

• List faults in advance
• Prepare likely parts
• Combined labour quote

Plumbing Point Inspection

Suitable before moving into a property to inspect taps, cisterns, basins, valves and visible leakage.

• Inspection checklist
• Identify failed parts
• Repair after approval

Several Bathrooms and Kitchens

Suitable for villas with many plumbing points that need a longer visit and a floor-by-floor work plan.

• Work by floor
• Count all fixtures
• Clear repair plan

Scheduled Plumbing Maintenance

Suitable for offices, restaurants and sites that need regular inspection of drains, mixers and cisterns.

• Planned visits
• Fault reports
• Price by point count

When Same-Day Service Is More Likely

Availability is better for visible leakage or blockage with easy access, clear photos and no restricted entry or rare parts.

When Advance Booking Is Better

Concealed leaks, several bathrooms, large villas and shared drainage lines usually need a longer planned visit.

What Photos Are Needed?

Send a full-area image, close-up fitting or drain photo, a video while water runs and the required fixture when relevant.

Is the Price Confirmed Before Work?

The visit price is explained first, then parts and additional labour are confirmed after inspection and before execution.

Signs of a Visible Leak

Drips or direct wetness below a hose, valve, tap, trap or toilet connection can usually be inspected without opening a wall.

• Clear source
• Direct access
• Test after repair

Signs of a Concealed Leak

Widening dampness, swollen paint, moisture smell, water sound with taps closed or unexplained consumption require a wider investigation.

• Internal dampness
• Source not visible
• Detection before repair

What Should the Customer Send?

Send close and wide photos, a video while nearby fixtures run, meter information when safely accessible and details of when the dampness increases.

• Current photos
• Time of appearance
• Nearby fixture use

Fault Location

Kitchen, bathroom, ceiling, floor and external lines differ in access, time and required tools.

Problem Type

A dripping tap or hose replacement differs from a broken pipe, concealed leak or deep blockage.

Access

Tight cabinets, ceilings and areas behind appliances may require extra time and organised dismantling.

Spare Parts

Cost depends on part type, size, quality and availability. Replacement requires approval first.

Number of Plumbing Points

Several faults at one property may qualify for a package, but every point still needs testing.

Detection or Surface Opening

Concealed leakage needs a defined investigation scope before any wall or floor is opened.